SALVASTOP_100
The Classic_40 has a completely painted, thick and reinforced steel structure. The blade with a diameter of 400 mm, the power of 3.0 kW and the rotation speed of 2800 rpm make it the ideal machine for those who work with wood up to a maximum of 80 mm thick and 250 mm wide.
SIA, con il suo staff altamente qualificato e specializzato, opera nei vari settori delle lavorazioni della lamiera e più precisamente:
- Saldatura: Per quanto riguarda le operazioni di saldatura SIA studia e progetta soluzioni adatte a soddisfare le esigenze di tutti i clienti. I nostri filtri mobili carrellati serie CAR-SMOG sono indicati per la filtrazione dei fumi di saldatura derivanti da lavorazioni occasionali e saltuarie. In caso di lavorazioni continuative SIA progetta e sviluppa impianti centralizzati con sistemi di filtrazione a celle metalliche serie ADP oppure con tasche in fibra di vetro della serie TCA. La captazione dei fumi e delle micro-polveri prodotte durante le operazioni di saldatura può essere effettuata per mezzo dei nostri bracci mobili serie AL oppure attraverso le nostre nuove pareti aspiranti.
- Smerigliatura: Siamo in grado di offrire svariate soluzioni per tutte le esigenze derivanti dalle operazioni di smerigliatura, quali la realizzazione di box e cabine fonoassorbenti oppure soluzioni modulari componibili attraverso l’utilizzo di pareti aspiranti fonoassorbenti. Le polveri derivanti da tale operazione sono efficacemente trattenute dai nostri depolveratori serie PNU, STS, TCA, SCC.
- Taglio termico: Grazie alla pluriennale esperienza in questo campo, SIA progetta e realizza impianti completi per l’aspirazione e la filtrazione delle polveri derivanti dalle operazioni di taglio termico. Qualora la macchina ne sia sprovvista, siamo in grado di fornire vasche modulari aspiranti dotate di micro e valvole pneumatiche per circoscrivere l’aspirazione solo nei settori interessati dal taglio della torcia. Grazie alle unità filtranti a cartucce della serie STS siamo in grado di ridurre la concentrazione delle polveri derivanti dalle attività di:
- Taglio laser;
- Ossitaglio;
- Taglio al plasma.
- Finitura metalli: SIA propone soluzioni tecnologiche all’avanguardia per la filtrazione degli scarti derivanti da lavorazioni di finitura dei metalli grazie all’ampia gamma di prodotti dedicati. La gamma di depolveratori a maniche e a cartucce della serie PNU e della serie STS permette la filtrazione di polveri di lavorazioni quali ad esempio sabbiatura, mentre i filtri a carboni attivi della serie ADP sono indicati per lavorazioni superficiali come il decapaggio, in presenza di solventi e agenti aggressivi. Altre lavorazioni alle quali può essere applicata la tecnologia di filtrazione SIA sono:
- Granigliatura;
- Fresatura;
- Limatura;
- Lucidatura.
SALVASTOP_100
Zero mistakes, zero waste, and higher productivity.
We thought SalvaStop_100 as a fundamental component to give your work an edge. Through numerical control, this electronic stop manages the push, stop and positioning of the profiles to be cut, regardless of the material. So you can reduce human errors, avoid waste and decrease labor costs. You can say goodbye to the tape measure!
Technical features
The characteristics of this technological stop have been designed to make your work easier and safer, increasing efficiency and decreasing costs.
-Servo drive motor closing loop: 11 Nm
-Power requirement: 230 volt 50 Hz
-Arm length/plate included: 600 mm / 200 mm x 100 mm
-Capacity with roller conveyor: up to 100 Kg
-S-PAD touch-screen: 7″
-Max length and stroke: 7000 mm / 6400 mm
The Beam
Due to an innovative technological concept we have created a new anodized aluminum beam- section mm 100×100- reinforced and with big thickness of the profile edge.
This beam has got 3 sides with groves to adapt and install the structure. One side is a flat fence to favour the sliding of the wood on the guide so that to avoid wearing and dust problems.
Thanks to the considerable dimensions of this solution, the pusher carriage reaches a movement speed of up to 60 meters per minute. The transmission system has a 32 mm wide toothed belt, with high precision internal steel cables, ensuring a wide capacity and a very high positioning tolerance. The machined steel heads are robust and independent, designed to have a long life, highly reliable and precise.
s-PAD and software
SalvaStop_100 is integrated with exclusive software that is easy to use thanks to an immediate, easily understandable and complete graphic interface. The s-PAD color touch-screen display has been designed to be in a perfect position to read and writing, also facilitated by a comfortable digital keyboard. In this software, which has a USB connection, the internet teleservice is included and installed.
Salvastop system has two main operating modes – “Stop” and “Push” – and a total of 5 different sections:
- “Stop” mode for single-length positioning or the possibility of recalling predetermined measurements.
- “Push” mode with repeatable fix cycles with 100 possible cutting lists.
- “Jog” mode and automatic reset.
- Wide possibility of customizing the parameters.
- Diagnostic and teleservice connection system.
Electronic hardware
The compact Servo Drive electronic motor guarantees simplicity, reliability, durability and efficiency. With this innovative technology you can manage closed loop positioning, checking the position at any time, even in case of heavy efforts and accidental external pressure.
The motor, that is mounted in pulling position, has a power of 11 Nm and the electrical and electronic inputs and outputs are integrated on the engine itself. Finally, the emergency and start buttons are ergonomically positioned, to facilitate the operator’s work.
SalvaStop Combo
Combine SalvaStop_100 with your cutting-off machine or one of our Classic cross-cutting saws, halve errors and optimize your work.You can have the SalvaStop_100 stop alone or combined with one of our Classic saws to improve performance, work in complete safety and minimize human errors.